Table 13-2 System Status: Show Statistics - ZyXEL Communications PRESTIGE 650H User Manual

The following table describes the labels in this screen.
LABEL
System up Time This is the elapsed time the system has been up.
CPU Load This field specifies the percentage of CPU utilization.
WAN Port Statistics This is the WAN port.
Link Status This is the status of your WAN link.
Transfer Rate This is the transfer rate in kbps.
Upstream Speed This is the upstream speed of your Prestige.
Downstream Speed This is the downstream speed of your Prestige.
Node-Link This field displays the remote node index number and link type. Link types are PPPoA,
ENET, RFC 1483 and PPPoE .
LAN Port Statistics This is the LAN port.
Interface This field displays the type of port.
Status For the WAN port, this displays the port speed and duplex setting if you're using Ethernet
encapsulation and down (line is down), idle (line (ppp) idle), dial (starting to trigger a
call) and drop (dropping a call) if you're using PPPoE encapsulation.
For a LAN port, this shows the port speed and duplex setting.
TxPkts This field displays the number of packets transmitted on this port.
RxPkts This field displays the number of packets received on this port.
Errors This field displays the number of error packets on this port.
Tx B/s This field displays the number of bytes transmitted in the last second.
Rx B/s This field displays the number of bytes received in the last second.
Up Time This field displays the elapsed time this port has been up.
Maintenance

Table 13-2 System Status: Show Statistics

Prestige 650 Series User's Guide
DESCRIPTION
13-5