Table 3-4 Internet Connection With Enet Encap - ZyXEL Communications PRESTIGE 650H User Manual

Prestige 650 Series User's Guide
The following table describes the labels in this screen.
LABEL
IP Address A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet. The
Single User Account feature can be used with either a dynamic or static IP address.
Select Obtain an IP Address Automatically if you have a dynamic IP address;
otherwise select Static IP Address and type your ISP assigned IP address in the IP
Address text box below.
Subnet Mask Enter a subnet mask in dotted decimal notation.
Refer to the IP Subnetting appendix to calculate a subnet mask If you are implementing
subnetting.
ENET ENCAP You must specify a gateway IP address (supplied by your ISP) when you use ENET
Gateway ENCAP in the Encapsulation field in the previous screen.
Network Address Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT
Translation chapter for more details.
Back Click Back to go back to the first wizard screen.
Next Click Next to continue to the next wizard screen.
3.10.4 PPPoA
Select PPPoA from the Encapsulation drop-down list box in the first wizard screen to display the screen as
shown.
3-10

Table 3-4 Internet Connection with ENET ENCAP

DESCRIPTION
Wizard Setup