P-202H Plus v2 User's Guide
The following table describes the fields in this screen.
Table 13 Edit SUA/NAT Server Set
LABEL
Start Port No.
End Port No.
IP Address
Save
Cancel
6.6 Configuring Address Mapping
Ordering your rules is important because the ZyXEL Device applies the rules in the order that
you specify. When a rule matches the current packet, the ZyXEL Device takes the
corresponding action and the remaining rules are ignored.
To change your ZyXEL Device's address mapping settings, click NAT, select Full Feature
and click Edit Details to open the following screen.
Figure 23 Address Mapping Rules
71
Enter a port number in this field.
To forward only one port, enter the port number again in the End Port No. field.
To forward a series of ports, enter the start port number here and the end port
number in the End Port No. field.
Enter a port number in this field.
To forward only one port, enter the port number again in the Start Port No. field
above and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with
the port number in the Start Port No. field above.
Enter the inside IP address of the server here.
Click Save to save your changes back to the ZyXEL Device.
Click Cancel to return to the previous configuration.
Chapter 6 Network Address Translation (NAT) Screens
DESCRIPTION