Snmp Traps - ZyXEL Communications NWA-1100 Manual

12.8.3 SNMP Traps

SNMP traps are messages sent by the agents of each managed device to the SNMP manager. These
messages inform the administrator of events in data networks handled by the device. The NWA can
send the following traps to the SNMP manager.
Table 41 SNMP Traps
TRAP NAME
Generic Traps
coldStart
warmStart
linkDown
linkUp
authenticationFailure
(defined in RFC-1215)
Traps defined in the
ZyXEL Private MIB.
whyReboot
pwTFTPStatus
Some traps include an SNMP interface index. The following table maps the SNMP interface indexes
to the NWA's physical and virtual ports.
Table 42 SNMP Interface Index to Physical and Virtual Port Mapping
TYPE
Physical
Virtual
NWA1100-N User's Guide
OBJECT IDENTIFIER #
(OID)
1.3.6.1.6.3.1.1.5.1
1.3.6.1.6.3.1.1.5.2
1.3.6.1.6.3.1.1.5.3
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.5
1.3.6.1.4.1.890.1.5.13.0.
1
1.3.6.1.4.1.890.1.9.2.3.3
.1
INTERFACE
enet0
enet1
enet2
enet3 ~ enet9
enet10 ~ enet16
enet17 ~ enet21
enet22 ~ enet26
DESCRIPTION
This trap is sent after booting (power on).
This trap is defined in RFC-1215.
This trap is sent after booting (software
reboot). This trap is defined in RFC-1215.
This trap is sent when the Ethernet link is
down.
This trap is sent when the Ethernet link is up.
The device sends this trap when it receives
any SNMP get or set requirements with the
wrong community (password).
Note: snmpEnableAuthenTraps, OID
1.3.6.1.2.1.11.30 (defined in RFC 1214 and
RFC 1907) must be enabled on in order for
the device to send authenticationFailure
traps. Use a MIB browser to enable or disable
snmpEnableAuthenTraps.
This trap is sent with the reason for restarting
before the system reboots (warm start).
"System reboot by user!" is added for an
intentional reboot (for example, download
new files, CI command "sys reboot").
If the system reboots because of fatal errors,
a code for the error is listed.
This trap is sent to indicate the status and
result of a TFTP client session that has ended.
PORT
Wireless LAN adaptor WLAN1
Ethernet port (LAN)
Wireless LAN adaptor WLAN2
WLAN1 in MBSSID mode
WLAN2 in MBSSID mode
WLAN1 in WDS mode
WLAN2 in WDS mode
Chapter 12 Remote Management
117