ZyXEL Communications NWA-1100 Manual page 114

Chapter 12 Remote Management
To change your NWA's WWW settings, click REMOTE MGNT > WWW. The following screen shows.
Figure 56 Remote Management: WWW
The following table describes the labels in this screen.
Table 39 Remote Management: WWW
LABEL
WWW
Server Port
Server Access
Secured Client IP
Address
Secured Client
MAC Address
Apply
Reset
114
DESCRIPTION
You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
Select the interface(s) through which a computer may access the NWA using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the
NWA using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the NWA using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the MAC address that you
specify to access the NWA using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
NWA1100-N User's Guide