ZyXEL Communications NWA-1100 Manual page 126

Chapter 14 Log Screens
The following table describes the labels in this screen.
Table 45 Log Settings
LABEL
Address Info
Mail Server
Mail Subject
Send Log to
SMTP Authentication
User Name
Password
Syslog Logging
Active
Syslog IP Address
Syslog Port
Number
Send Log
Log Schedule
Day for Sending
Log
Time for Sending
Log
Clear log after
sending mail
Log
System
Maintenance
System Errors
802.1x
Wireless
Email log now
126
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-mail
addresses specified below. If this field is left blank, logs and alert messages
will not be sent via e-mail.
Type a title that you want to be in the subject line of the log e-mail message
that the NWA sends.
Logs are sent to the e-mail address specified in this field. If this field is left
blank, logs will not be sent via e-mail.
If you use SMTP authentication, the mail receiver should be the owner of the
SMTP account.
If your e-mail account requires SMTP authentication, enter the username
here.
Enter the password associated with the above username.
Syslog logging sends a log to an external syslog server used to store logs.
Click Active to enable syslog logging.
Enter the IP address of the syslog server that will log the selected categories
of logs.
Enter the port number of the syslog server that will log the selected
categories of logs.
This drop-down menu is used to configure the frequency of log messages
being sent as E-mail:
• Daily
• Weekly
• Hourly
• When Log is Full
• None.
If the Weekly or the Daily option is selected, specify a time of day when
the E-mail should be sent. If the Weekly option is selected, then also
specify which day of the week the E-mail should be sent. If the When Log is
Full option is selected, an alert is sent when the log fills up. If you select
None, no log messages are sent.
This field is only available when you select Weekly in the Log Schedule
field.
Use the drop down list box to select which day of the week to send the logs.
Enter the time of the day in 24-hour format (for example 23:00 equals
11:00 pm) to send the logs.
Select the check box to clear all logs after logs and alert messages are sent
via e-mail.
Click this to receive logs related to system maintenance.
Click this to receive logs related to system errors.
Click this to receive logs related to the 802.1x mode.
Click this to receive logs related to the wireless function.
Select the categories of alerts for which you want the NWA to immediately
send e-mail alerts.
NWA1100-N User's Guide