ZyXEL Communications NWA-1100 Manual page 140

Chapter 16 Troubleshooting
I cannot access the Internet anymore. I had access to the Internet (with the NWA), but my
Internet connection is not available anymore.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
1
Start Guide and
Reboot the NWA.
2
If the problem continues, contact your ISP or network administrator.
3
The Internet connection is slow or intermittent.
There might be a lot of traffic on the network. Look at the LEDs, and check
1
If the NWA is sending or receiving a lot of information, try closing some programs that use the
Internet, especially peer-to-peer applications.
Check the signal strength. If the signal is weak, try moving the NWA (in wireless client mode) closer
2
to the AP (if possible), and look around to see if there are any devices that might be interfering with
the wireless network (microwaves, other wireless networks, and so on).
Reboot the NWA.
3
If the problem continues, contact the network administrator or vendor, or try one of the advanced
4
suggestions.
Advanced Suggestions
• Check the settings for QoS. If it is disabled, you might consider activating it.
140
Section 1.7 on page 27.
Section 1.7 on page 27.
NWA1100-N User's Guide