Log Settings Screen - ZyXEL Communications NWA-1100 Manual

The following table describes the labels in this screen.
Table 44 View Log
LABEL
Time
Source
Message
Refresh
Clear Log

14.5 Log Settings Screen

Use this screen to configure to where and when the NWA is to send the logs and which logs and/or
immediate alerts it is to send.
To change your NWA's log settings, click LOGS > Log Settings. The screen appears as shown.
Figure 64 Log Settings
NWA1100-N User's Guide
DESCRIPTION
This field displays the time the log was recorded.
This field lists the source IP address and the port number of the incoming
packet.
This field states the reason for the log.
Click Refresh to renew the log screen.
Click Clear Log to clear all the logs.
Chapter 14 Log Screens
125