The following table describes the labels in this screen.
Table 27 Security: WPA for Wireless Client
LABEL
Security Settings
Profile Name
Security Mode
Data Encryption
IEEE802.1x Authentication
EAP Type
User Information
Username
Password
Apply
Reset
Back
8.4.5 Security: WPA2 or WPA2-MIX
This screen varies depending on whether you select Access Point or Wireless Client in the
Wireless > Wireless Settings screen.
8.4.5.1 Access Point
Use this screen to use WAP2 or WPA2-MIX as the security mode for your NWA that is in Access Point
operating mode. Select WPA2 or WPA2-MIX in the Security Mode field to display the following
screen.
Figure 42 Security:WPA2 or WPA2-MIX for Access Point
NWA1100-N User's Guide
DESCRIPTION
This is the name that identifying this profile.
Choose the same security mode used by the AP.
Select between None and TKIP.
The options on the left refer to EAP methods. You can choose either TLS, LEAP,
PEAP or TTLS.
The options on the right refer to authentication protocols. You can choose
between MSCHAPv2 and GTC.
Supply the username of the account created in the RADIUS server.
Supply the password of the account created in the RADIUS server.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
Click Back to return to the previous screen.
Chapter 8 Wireless Security Screen
95