ZyXEL Communications NWA-1100 Manual page 68

Chapter 6 Wireless Settings Screen
Table 12 Wireless > Wireless Settings: Bridge/Repeater (continued)
LABEL
Rates Configuration
MCS Table
Apply
Cancel
68
DESCRIPTIONS
This section controls the data rates permitted for clients.
For each Rate, select an option from the Configuration list. The options
are:
• Basic (1~11 Mbps only): Clients can always connect to the access point
at this speed.
• Optional: Clients can connect to the access point at this speed, when
permitted to do so by the AP.
• Disable: Clients cannot connect to the access point at this speed.
The MCS Rate table is available only when 802.11 b/g/n is selected in the
802.11 Wireless Mode field.
IEEE 802.11n supports many different data rates which are called MCS rates.
MCS stands for Modulation and Coding Scheme. This is an 802.11n feature
that increases the wireless network performance in terms of throughput.
For each MCS Rate (0-15), select either Enable (default) to have the NWA
use the data rate. Select Disable if you do not want the NWA to use the data
rate.
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
NWA1100-N User's Guide