Back To Factory Defaults; Restart Screen - ZyXEL Communications NWA-1100 Manual

15.7.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and
returns the NWA to its factory defaults as shown on the screen. The following warning screen will
appear.
Figure 75 Reset Warning Message
You can also press the RESET button to reset your NWA to its factory default settings. Refer to
Section 2.2 on page 30

15.8 Restart Screen

Use this screen to reboot the NWA without turning the power off.
Click Maintenance > Restart. The following screen displays.
Figure 76 Restart Screen
Click Restart to have the NWA reboot. This does not affect the NWA's configuration.
NWA1100-N User's Guide
for more information.
Chapter 15 Maintenance
135