Shining 3D Einstar Vega Manual page 52

can create a new workspace and enter it directly.
After entering Workspace, click File > Create workspace in the top navigation bar, you can create a new
workspace and enter it directly.
Import a Workspace / Model File
Open the file card list of
selection dialog, where you can import project files (.proj); click on the newly added project file card to enter
the corresponding workspace.
Open the file card list of
imported, click Import workspace in the pop-up window to create a new workspace and enter it.
Note
You can choose to add model files by clicking
the device file list to import the model files on the device into the model library.
After entering Workspace, click
Import from scanner, Import from Model Library or Import local file.
Note
Model files imported from the scanner or locally imported files will be added to the model library automatically.
About how to connect the scanner, please refer to
Workspace Interface
① Top Navigation Bar
Click to return to the
Click the View button to expand the drop-down list, where you can choose to hide / show texture or reset the
view.
Click on the right side of the workspace's name to expand the drop-down list, where you can rename or
export the workspace.
Workspace in the
Model Library in the
in the top right corner of the left-side model list, and you can choose
main interface.
main interface, click
main interface, select the model file that needs to be
Import local file or
connect the scanner.
Import local file to open the file
Import from scanner; or you can open