Network Module Front Panel Leds; Figure 5-2 Sam1008 Front Panel Leds; Figure 5-3 Aam1008 Front Panel Leds; Table 5-1 Network Module Led Descriptions - ZyXEL Communications IES-1000 Hardware Installation Manual

IES-1000 Hardware Installation Guide
5.2

Network Module Front Panel LEDs

The following figures show the front panels of the network modules. LEDs describe the operational status of your
network module. Please also refer to the Hardware Troubleshooting chapter to see how LEDs may aid in
troubleshooting.
LED COLOR
ALM Red
SYS Green
SHDSL (1-8) Green
or ADSL (1-8)
LAN Green
Yellow
5-2

Figure 5-2 SAM1008 Front Panel LEDs

Figure 5-3 AAM1008 Front Panel LEDs

Table 5-1 Network Module LED Descriptions

STATUS
On The module has overheated.
Off The module is functioning within normal temperature parameters.
Blinking The system is initializing.
On The module is on and functioning properly.
Off The system is not receiving power, is not ready or has a malfunction.
On The DSL link is up.
Off The DSL link is down.
Blinking The system is transmitting/receiving to/from a 10 Mbps Ethernet network.
On The link to a 10 Mbps Ethernet network is up.
Off The link to a 10 Mbps Ethernet network is down.
Blinking The system is transmitting/receiving to/from a 100 Mbps Ethernet network.
On The link to a 100 Mbps Ethernet network is up.
Off The link to a 100 Mbps Ethernet network is down.
DESCRIPTION
Turning On Your IES-1000