IES-1000 Hardware Installation Guide
Connect the top ports of MDF 1 to the telephone company.
4.4.5
LAN Port (Ethernet) Connection
Connect the LAN port of your SAM1008 to an Ethernet WAN switch using a straight-through Category 5 UTP
(Unshielded Twisted Pair) cable with RJ-45 connectors. Connect the other end of the cable to an Ethernet switch.
You may stack multiple IES-1000 units up to the number of ports available on the Ethernet switch as shown next.
4.4.6
Power Cord
Connect the female end of the power cord to the power receptacle on the front panel of your IES-1000 (to the right
of the fuse housing) as shown next. Connect the other end of the cord to a power outlet. Make sure that no objects
obstruct the airflow of the fans (locatd on the side of the unit).
4-12
Figure 4-12 Stacking Multiple IES-1000 Units
Hardware Connections