Figure 3-4 Installing A Network Module Into The Ies-1000 Chassis; Figure 3-5 Tighten Module Screws - ZyXEL Communications IES-1000 Hardware Installation Manual

Figure 3-4 Installing a Network Module into the IES-1000 Chassis

The front of the network module must be flush with the front of the IES-1000 after you install a
Secure the module to the chassis by turning the two screws on the front of the module clockwise as
Step 3.
shown next.
Removing and Installing Network Modules
network module or it will not work!

Figure 3-5 Tighten Module Screws

IES-1000 Hardware Installation Guide
3-3