Installing A Network Module; Figure 3-3 Removing A Network Module From The Ies-1000 Chassis - ZyXEL Communications IES-1000 Hardware Installation Manual

IES-1000 Hardware Installation Guide

Figure 3-3 Removing a Network Module from the IES-1000 Chassis

3.2

Installing a Network Module

Hold the module with the network ports facing you and insert it into an empty slot located on the front
Step 1.
of the IES-1000 as shown next.
Push the bottom of the front of the module into the IES-1000. The front of the module should be flush
Step 2.
with the IES-1000 chassis.
3-2 Removing and Installing Network Modules