Ves-1012 Front Panel Leds; Figure 5-2 Ves-1012 Front Panel; Table 5-1 Ves-1012 Led Descriptions - ZyXEL Communications VES-1012 Hardware Installation Manual

VES-1012 Hardware Installation Guide
5.2

VES-1012 Front Panel LEDs

The following figure shows the front panel of the VES-1012. LEDs describe the operational status of your VES-
1012. Please also refer to the Troubleshooting chapter to see how LEDs may aid in troubleshooting.
LED COLOR
PWR Green
SYS Green
ALM Red
PORT (1-12) Green
10 Mbps Green
100 Mbps Yellow
5-2

Figure 5-2 VES-1012 Front Panel

Table 5-1 VES-1012 LED Descriptions

STATUS
ON The system is turned on.
OFF The system is off.
Blinking The system is rebooting and performing self-diagnostic tests.
ON The system is on and functioning properly.
OFF The power is off or the system is not ready/malfunctioning.
ON The system is functioning abnormally.
OFF The system is functioning normally.
Blinking The system is transmitting/receiving to/from the VDSL modem.
ON The link to the VDSL modem is up.
OFF The link to the VDSL modem is down.
Blinking The system is transmitting/receiving to/from a 10 Mbps Ethernet network.
ON The link to a 10 Mbps Ethernet network is up.
OFF The link to a 10 Mbps Ethernet network is down.
Blinking The system is transmitting/receiving to/from a 100 Mbps Ethernet network.
ON The link to a 100 Mbps Ethernet network is up.
OFF The link to a 100 Mbps Ethernet network is down.
DESCRIPTION
Turning On Your VES-1012