Diagram 3 Locations Of The Installed And Spare Fuses - ZyXEL Communications IES-1000 Hardware Installation Manual

Remove the burnt-out fuse from the IES-1000. A burnt-out fuse is blackened, darkened or cloudy inside
Step 5.
its glass casing. A working fuse has a completely clear glass casing. Dispose of the burnt-out fuse.
Installing Fuses
After removing the burnt-out fuse, gently push the replacement fuse into the same location as the old
Step 1.
fuse until you hear a click.
Firmly, but gently, push the fuse housing back into the IES-1000 housing until you hear a click.
Step 2.
Plug the power cord back into the IES-1000.
Step 3.
Appendix A Removing and Installing a Fuse

Diagram 3 Locations of the Installed and Spare Fuses

IES-1000 Hardware Installation Guide
C