Adsl Port Connections; Figure 4-5 Magnified View Of Mdf Wiring - ZyXEL Communications IES-1000 Hardware Installation Manual

IES-1000 Hardware Installation Guide

Figure 4-5 Magnified View of MDF Wiring

Connect wiring from end-user equipment to the lower ports of an MDF using a telephone wire. Connect wiring
from the telephone company to the upper ports of an MDF (see the previous figure).
Some MDFs have surge protection circuitry built in between the two banks; thus, do not connect telephone wires
from the telephone company directly to the IES-1000.
Use a punch-down tool to seat telephone lines between MDF blocks.
This chapter details how to connect ADSL wiring to MDFs based on your existing telephone wiring
infrastructure.
4.4

ADSL Port Connections

The AAM1008 network module can provide ADSL and voice services over the same telephone wiring. It also has
built in splitters that save space and simplify installation.
The following figure gives an example of a basic installation scenario for using the AAM1008 to combine voice
and data signals.
Hardware Connections 4-5