ZyXEL Communications GS2200-24 Series User Manual page 86

Chapter 8 Basic Setting
To view the current amount of power that PDs are receiving from the Switch, click
Basic Setting > PoE Setup.
Figure 45 Basic Setting > PoE Status
The following table describes the labels in this screen.
Table 14 Basic Setting > PoE Status
LABEL
PoE Status
PoE Mode
Total Power
Consuming
Power (W)
Allocated
Power (W)
Remaining
Power (W)
Port
86
DESCRIPTION
This field displays the power management mode used by the Switch,
whether it is in Classification or Consumption mode.
This field displays the total power the Switch can provide to the connected
PoE-enabled devices on the PoE ports.
This field displays the amount of power the Switch is currently supplying to
the connected PoE-enabled devices.
This field displays the total amount of power the Switch has reserved for
PoE after negotiating with the connected PoE device(s).
Consuming Power (W) can be less than or equal but not more than the
Allocated Power (W).
This field displays the amount of power the Switch can still provide for PoE.
Note: The Switch must have at least 16 W of remaining power in order
to supply power to a PoE device, even if the PoE device needs
less than 16W.
This is the port index number.
GS2200-24/24P User's Guide