ZyXEL Communications GS2200-24 Series User Manual page 48

Chapter 4 The Web Configurator
Table 5 Navigation Panel Links (continued)
LINK
IP Application
Static Routing
DiffServ
DHCP
Management
Maintenance
Access Control
Diagnostic
Syslog
Cluster
Management
MAC Table
ARP Table
Configure
Clone
48
DESCRIPTION
This link takes you to a screen where you can configure static routes. A
static route defines how the Switch should forward traffic by configuring
the TCP/IP parameters manually.
This link takes you to screens where you can enable DiffServ, configure
marking rules and set DSCP-to-IEEE802.1p mappings.
This link takes you to screens where you can configure the DHCP
settings.
This link takes you to screens where you can perform firmware and
configuration file maintenance as well as reboot the system.
This link takes you to screens where you can change the system login
password and configure SNMP and remote management.
This link takes you to a screen where you can view system logs and test
port(s).
This link takes you to screens where you can setup system logs and a
system log server.
This link takes you to screens where you can configure clustering
management and view its status.
This link takes you to a screen where you can view the MAC addresses
(and types) of devices attached to what ports and VLAN IDs.
This link takes you to a screen where you can view the MAC addresses –
IP address resolution table.
This link takes you to a screen where you can copy attributes of one port
to other ports.
GS2200-24/24P User's Guide