ZyXEL Communications GS2200-24 Series User Manual page 34

Chapter 3 Hardware Panels
The following table describes the port labels on the front panel.
Table 1 Front Panel Connections (GS2200-24)
LABEL
24 10/100/
1000 RJ-45
Ethernet
Ports
Four Dual
Personality
Interfaces
Console Port
Figure 8 Front Panel (GS2200-24P)
The following table describes the port labels on the front panel.
Table 2 Front Panel Connections (GS2200-24P)
LABEL
24 100/1000
BASE-T PoE
Ports
34
DESCRIPTION
Connect these ports to a computer, a hub, an Ethernet switch or router.
Each interface has one 1000BASE-T RJ-45 port and one Small Form-Factor
Pluggable (SFP) slot (also called a mini-GBIC slot), with one port or
transceiver active at a time.
Note: The ports change to fiber mode directly when inserting the fiber
module.
• Four 100/1000 Mbps RJ-45 Ports:
Connect these ports to high-bandwidth backbone network Ethernet
switches using 1000BASE-T compatible Category 5/5e/6 copper cables.
• Four Mini-GBIC Slots:
Use mini-GBIC transceivers in these slots for connections to backbone
Ethernet switches.
The console port is for local configuration of the Switch.
LEDs
Ethernet Ports
DESCRIPTION
Connect these ports to a computer, a hub, an Ethernet switch or router.
Console Port
Dual Personality Interfaces
GS2200-24/24P User's Guide