ZyXEL Communications GS2200-24 Series User Manual page 295

Table 96 SNMP System Traps (continued)
OPTION OBJECT LABEL
poe PwrPortFailedEventOn
PwrPortFailedEventClear
PsePwrFailedEventOn
PsePwrFailedEventClear
Table 97 SNMP InterfaceTraps
OPTION OBJECT LABEL
linkup linkUp
LinkDownEventClear
linkdown linkDown
LinkDownEventOn
lldp LLDPRemoteTopologyCh
ange
GS2200-24/24P User's Guide
OBJECT ID
1.3.6.1.4.1.890.1.5.8.56.2
7.2.1
1.3.6.1.4.1.890.1.5.8.56.2
7.2.2
1.3.6.1.4.1.890.1.5.8.56.2
7.2.1
1.3.6.1.4.1.890.1.5.8.56.2
7.2.2
OBJECT ID
1.3.6.1.6.3.1.1.5.4
1.3.6.1.4.1.890.1.5.8.55.27
.2.2
1.3.6.1.6.3.1.1.5.3
1.3.6.1.4.1.890.1.5.8.55.27
.2.1
1.0.8802.1.1.2.0.0.1
Chapter 32 Access Control
DESCRIPTION
This trap is sent when the port
is turned off to supply power
due to overloading, over
system buget, or short circuit.
This trap is sent when the port
returns to the normal state
and has the ability to supply
power.
This trap is sent when the
power supply of PoE failed. The
trigger situation includes
internal/external power supply
failure, external fan speed
failure, and external power has
exceed normal temperature.
This trap is sent when the
power supply of PoE returns to
the normal state.
DESCRIPTION
This trap is sent when the
Ethernet link is up.
This trap is sent when the
Ethernet link is up.
This trap is sent when the
Ethernet link is down.
This trap is sent when the
Ethernet link is down.
This trap is sent when the
LLDP (Link Layer Discovery
Protocol) remote topology
changes.
295