Table 91 Interface Port-Channel Commands - ZyXEL Communications GS-4024 User Manual

GS-4024 User's Guide

Table 91 interface port-channel Commands

COMMAND
interface
port-channel
<port-list>
bandwidth-limit
bpdu-control
<peer|tunnel|discard
|network>
broadcast-limit
diffserv
dlf-limit
egress set <port-
list>
exit
flow-control
frame-type
<all|tagged>
gvrp
help
inactive
244
egress <Mbps>
ingress <Mbps>
<pkt/s>
<pkt/s>
Chapter 39 Introducing the Commands
DESCRIPTION
Enables a port or a list of ports
for configuration.
Enables bandwidth control on
the port(s).
Sets the maximum bandwidth
allowed for outgoing traffic on
the port(s).
Sets the maximum bandwidth
allowed for incoming traffic on
the port(s).
Sets how Bridge Protocol Data
Units (BPDUs) are used in STP
port states.
Enables broadcast storm
control limit on the switch.
Sets how many broadcast
packets the interface receives
per second.
Enables DiffServ on the port(s).
Enables the Destination Lookup
Failure (DLF) limit.
Sets the interface DLF limit in
packets per second (pps).
Sets the outgoing traffic port list
for a port-based VLAN.
Exits from the interface port-
channel command mode.
Enables interface flow control.
Flow control regulates
transmissions to match the
bandwidth of the receiving port.
Choose to accept both tagged
and untagged incoming frames
or just tagged incoming frames
on a port.
Enables this function to permit
VLAN groups beyond the local
switch.
Displays a description of the
interface port-channel
commands.
Disables the specified port(s) on
the switch.