GS-4024 User's Guide
Table 11 IP Setup (continued)
LABEL
Apply
Cancel
IP Interface
Use these fields to create or edit IP routing domains on the switch.
IP Address Enter the IP address of your switch in dotted decimal notation for example 192.168.1.1.
IP Subnet
Mask
VID
Add
Cancel
Index
IP Address
Subnet Mask
VID
Delete
Cancel
7.8 Port Setup
Click Basic Setting and then Port Setup in the navigation panel to display the configuration
screen.
Figure 29 Port Setup
The following table describes the labels in this screen.
78
DESCRIPTION
Click Apply to save the settings.
Click Cancel to reset the fields to your previous configuration.
This is the IP address of the switch in an IP routing domain.
Enter the IP subnet mask of an IP routing domain in dotted decimal notation. For
example, 255.255.255.0.
Enter the VLAN identification number to which an IP routing domain belongs.
Click Add to save the new rule to the switch. It then displays in the summary table at
the bottom of the screen.
Click Cancel to reset the fields to your previous configuration.
This field displays the index number of an entry.
This field displays IP address of the switch in the IP domain.
This field displays the subnet mask of the switch in the IP domain.
This field displays the VLAN identification number of the IP domain on the switch.
Click Delete to remove the selected entry from the summary table.
Note: Deleting all IP domains locks you out from the switch.
Click Cancel to clear the Delete check boxes.
Chapter 7 Basic Setting