This chapter discusses static MAC address port filtering.
10.1 Overview
Filtering means sifting traffic going through the switch based on the source and/or destination
MAC addresses and VLAN group (ID).
10.2 Configure a Filtering Rule
Click Advanced Application, Filtering in the navigation panel to display the screen as shown
next. Scroll down to the bottom of the screen to view the summary table for the settings.
Figure 38 Filtering
The following table describes the related labels in this screen.
Table 19 FIltering
LABEL
Active
Name
Chapter 10 Filtering
DESCRIPTION
Make sure to select this check box to activate your rule. You may temporarily
deactivate a rule without deleting it by deselecting this check box.
Type a descriptive name (up to 32 printable ASCII characters). This is for
identification purpose only.
C
H A P T E R
GS-4024 User's Guide
1 0
Filtering
95