Figure 84 DHCP: Relay
The following table describes the labels in this screen.
Table 66 DHCP: Relay
LABEL
Active
Remote DHCP
Server 1 .. 3
Relay Agent
Information
Information
Apply
Cancel
29.4.1 DHCP Relay Configuration Example
The follow figure shows a network example where the switch is used to relay DHCP requests
for the RD and Sales network. There is only one DHCP server that services the DHCP clients
in both networks.
Chapter 29 DHCP
DESCRIPTION
Select this check box to enable DHCP relay.
Enter the IP address of a DHCP server in dotted decimal notation.
Select the Option 82 check box to have the switch add information (slot number, port
number and VLAN ID) to client TCP/IP configuration requests that it relays to a DHCP
server.
This read-only field displays the system name you configure in the General Setup
screen.
Select the check box for the switch to add the system name to the DHCP client TCP/IP
configuration requests that it relays to a DHCP server.
Click Apply to save the changes.
Click Cancel to discard all changes and start configuring the screen again.
GS-4024 User's Guide
173