System Statistics; Figure 119 System Status: Show Statistics; Table 62 System Status: Show Statistics - ZyXEL Communications G-3000 User Manual

Chapter 16 Maintenance
Table 61 System Status
LABEL
IP Subnet Mask
DHCP
Show Statistics

16.2.1 System Statistics

Read-only information here includes port status, packet specific statistics and bridge link
status. Also provided are "system up time" and "poll interval(s)". The Poll Interval field is
configurable.

Figure 119 System Status: Show Statistics

The following table describes the labels in this screen.

Table 62 System Status: Show Statistics

LABEL
Port
Status
190
DESCRIPTION
This is the Ethernet port subnet mask.
This is the Ethernet port DHCP role - Client or None.
Click Show Statistics to see router performance statistics such as number of
packets sent and number of packets received for each port.
DESCRIPTION
This is the Ethernet port or wireless adapter.
This shows the port speed and duplex setting if you are using Ethernet
encapsulation for the Ethernet port. Ethernet port connections can be in half-
duplex or full-duplex mode. Full-duplex refers to a device's ability to send and
receive simultaneously, while half-duplex indicates that traffic can flow in only
one direction at a time. The Ethernet port must use the same speed or duplex
mode setting as the peer Ethernet port in order to connect.
This shows the transmission speed only for the wireless port.
G-3000 Series User's Guide