Basic Setup Complete - ZyXEL Communications G-3000 User Manual

Chapter 3 Wizard Setup
Table 4 Wizard 3 : IP Address Assignment
LABEL
IP Address
IP Subnet Mask
Gateway IP Address
Back
Finish

3.5 Basic Setup Complete

When you click Finish in the Wizard 3 IP Address Assignment screen, a warning window
display as shown. Click OK to close the window and log in to the web configurator again
using the new IP address if you change the default IP address (192.168.1.2).
You have successfully set up the ZyXEL Device. A screen displays prompting you to close the
web browser.
Click Yes. Otherwise, click No and the congratulations screen shows next.
50
DESCRIPTION
Enter the IP address of your ZyXEL Device in dotted decimal notation.
Note: If you changed the ZyXEL Device's IP address, you must
use the new IP address if you want to access the web
configurator again.
Type the subnet mask.
Type the IP address of the gateway. The gateway is an immediate neighbor
of your ZyXEL Device that will forward the packet to the destination. The
gateway must be a router on the same segment as your ZyXEL Device's LAN
or WAN port.
Click Back to return to the previous screen.
Click Finish to proceed to complete the Wizard setup.
G-3000 Series User's Guide