Configure The Voip Network; Figure 15 Tutorial: Wireless Lan: Change Mode - ZyXEL Communications G-3000 User Manual

Chapter 4 Tutorial

Figure 15 Tutorial: Wireless LAN: Change Mode

• This Select SSID Profile table allows you to activate or deactivate SSID profiles. Your
wireless network was previously using the SSID04 profile, so select SSID04 in one of the
Profile list boxes (number 3 in this example).
• Select the Index box for the entry and click Apply to activate the profile. Your standard
wireless network (SSID04) is now accessible to your wireless clients as before. You do
not need to configure anything else for your standard network.
• Clear the Enable Intra BSS Traffic check box so clients cannot access other clients on
the same wireless network (see

4.2.2 Configure the VoIP Network

Next, click WIRELESS > SSID. The following screen displays. Note that all of the SSID
profiles are using the security01 security profile. You cannot change this security profile
without changing the security parameters for every SSID (including SSID4, the standard
network), so you will use different security profiles for the different SSIDs.
56
Section 6.1.1 on page 73).
G-3000 Series User's Guide