Ip Screen; Chapter 10 Ip Screen; Factory Ethernet Defaults; Tcp/Ip Parameters - ZyXEL Communications G-3000 User Manual

C
H A P T E R
This chapter discusses how to configure IP on the ZyXEL Device.

10.1 Factory Ethernet Defaults

The Ethernet parameters of the ZyXEL Device are preset in the factory with the following
values:
1 IP address of 192.168.1.2
2 Subnet mask of 255.255.255.0 (24 bits)
These parameters should work for the majority of installations.

10.2 TCP/IP Parameters

10.2.1 WAN IP Address Assignment

Every computer on the Internet must have a unique IP address. If your networks are isolated
from the Internet (only between your two branch offices, for instance) you can assign any IP
addresses to the hosts without problems. However, the Internet Assigned Numbers Authority
(IANA) has reserved the following three blocks of IP addresses specifically for private
networks.

Table 34 Private IP Address Ranges

10.0.0.0
172.16.0.0
192.168.0.0
You can obtain your IP address from the IANA, from an ISP or have it assigned by a private
network. If you belong to a small organization and your Internet access is through an ISP, the
ISP can provide you with the Internet addresses for your local networks. On the other hand, if
you are part of a much larger organization, you should consult your network administrator for
the appropriate IP addresses.
G-3000 Series User's Guide
- 10.255.255.255
- 172.31.255.255
- 192.168.255.255
10

IP Screen

123