Figure 98 Vlan-Aware Switch - Static Vlan; Figure 99 Vlan-Aware Switch; Figure 100 Vlan-Aware Switch - Vlan Status - ZyXEL Communications G-3000 User Manual

Perform the following steps in the switch web configurator:
1 Click VLAN under Advanced Application.
2 Click Static VLAN.
3 Select the ACTIVE check box.
4 Type a Name for the VLAN ID.
5 Type a VLAN Group ID. This should be the same as the management VLAN ID on the
ZyXEL Device.
6 Enable Tx Tagging on the port which you want to connect to the ZyXEL Device.
Disable Tx Tagging on the port you are using to connect to your computer.
7 Under Control, select Fixed to set the port as a member of the VLAN.

Figure 98 VLAN-Aware Switch - Static VLAN

8 Click Apply. The following screen displays.

Figure 99 VLAN-Aware Switch

9 Click VLAN Status to display the following screen.

Figure 100 VLAN-Aware Switch - VLAN Status

Follow the instructions in the Quick Start Guide to set up your ZyXEL Device for
configuration. The ZyXEL Device should be connected to the VLAN-aware switch. In the
above example, the switch is using port 1 to connect to your computer and port 2 to connect to
the ZyXEL Device:
1 In the ZyXEL Device web configurator click VLAN to open the VLAN setup screen.
G-3000 Series User's Guide
Figure 97 on page 176.
Chapter 15 VLAN
177