Configuring Vlan Groups; Figure 102 New Global Security Group - ZyXEL Communications G-3000 User Manual

Table 60 Standard RADIUS Attributes
ATTRIBUTE NAME
Tunnel-Medium-Type
Tunnel-Private-Group-ID 081
The following occurs under Dynamic VLAN Assignment:
1 When you configure your wireless credentials, the ZyXEL Device sends the information
to the IAS server using RADIUS protocol.
2 Authentication by the RADIUS server is successful.
3 The RADIUS server sends three attributes related to this feature.
4 The ZyXEL Device compares these attributes with the VLAN screen mapping table.
4a If the Name, for example "VLAN 20" is found, the mapped VLAN ID is used.
4b If the Name is not found in the mapping table, the string in the Tunnel-Private-
Group-ID attribute is considered as a number ID format, for example 2493. The
range of the number ID (Name:string) is between 1 and 4094.
4c If a or b are not matched, the ZyXEL Device uses the VLAN ID configured in the
WIRELESS VLAN screen and the wireless station. This VLAN ID is independent
and hence different to the ID in the VLAN screen.

15.2.3.1 Configuring VLAN Groups

To configure a VLAN group you must first define the VLAN Groups on the Active Directory
server and assign the user accounts to each VLAN Group.
1 Using the Active Directory Users and Computers administrative tool, create the VLAN
Groups that will be used for each VLAN ID. One VLAN Group must be created for each
VLAN defined on the ZyXEL Device. The VLAN Groups must be created as Global/
Security groups.
• Type a name for the VLAN Group that describes the VLAN Group's function.
• Select the Global Group scope parameter check box.
• Select the Security Group type parameter check box.
• Click OK.

Figure 102 New Global Security Group

G-3000 Series User's Guide
TYPE VALUE
065 6 (decimal) – 802
<vlan-name> (string) – either the Name you enter in the ZyXEL
Device's VLAN > RADIUS VLAN screen or the number. See
Figure 113 on page
Chapter 15 VLAN
185.
179