Figure 125 Management > Access Control > Logins; Table 86 Management > Access Control > Logins - ZyXEL Communications ES-2108 User Manual

Chapter 27 Access Control
It is highly recommended that you change the default administrator password
(1234).
• A non-administrator (username is something other than admin) is someone who can view
but not configure Switch settings.
Click Access Control from the navigation panel and then click Logins from this screen.
Figure 125 Management > Access Control > Logins
The following table describes the labels in this screen.
Table 86 Management > Access Control > Logins
LABEL
Administrator
This is the default administrator account with the "admin" user name. You cannot change the default
administrator user name. Only the administrator has read/write access.
Old Password
New Password
Retype to confirm Retype your new system password for confirmation
Edit Logins
You may configure passwords for up to four users. These people have read-only access.
User Name
Password
Retype to confirm Retype your new system password for confirmation
212
DESCRIPTION
Type the existing system password (1234 is the default password when
shipped).
Enter your new system password.
Set a user name (up to 30 characters long).
Enter your new system password.
ES-2108 Series User's Guide