Snmp V3 And Security; Supported Mibs; Snmp Traps; Table 78 Private Mib Oid Starting Numbers - ZyXEL Communications ES-2108 User Manual

Hide thumbs Also See for ES-2108:
Table of Contents

Advertisement

27.3.1 SNMP v3 and Security

SNMP v3 enhances security for SNMP management. SNMP managers can be required to
authenticate with agents before conducting SNMP management sessions.
Security can be further enhanced by encrypting the SNMP messages sent from the managers.
Encryption protects the contents of the SNMP messages. When the contents of the SNMP
messages are encrypted, only the intended recipients can read them.

27.3.2 Supported MIBs

MIBs let administrators collect statistics and monitor status and performance.
The Switch supports the following MIBs:
• SNMP MIB II (RFC 1213)
• RFC 1157 SNMP v1
• RFC 1493 Bridge MIBs
• RFC 1643 Ethernet MIBs
• RFC 1155 SMI
• RFC 2674 SNMPv2, SNMPv2c
• RFC 1757 RMON
• SNMPv2, SNMPv2c or later version, compliant with RFC 2011 SNMPv2 MIB for IP,
RFC 2012 SNMPv2 MIB for TCP, RFC 2013 SNMPv2 MIB for UDP

27.3.3 SNMP Traps

The Switch sends traps to an SNMP manager when an event occurs.
This table lists the beginnings of the private MIB trap OIDs for the various ES-2108 models.
An OID (Object ID) that begins with one of the numbers listed here is defined in the related
model's private MIBs. Otherwise, it is a standard MIB OID.

Table 78 Private MIB OID Starting Numbers

PRIVATE MIB OID START
1.3.6.1.4.1.890.1.5.8.18
1.3.6.1.4.1.890.1.5.8.29
1.3.6.1.4.1.890.1.5.8.22
1.3.6.1.4.1.890.1.5.8.19
1.3.6.1.4.1.890.1.5.8.21
The following tables outline the SNMP traps by category. For private MIBs, the listed Object
ID shows an "X" for the numbers that vary by model. Refer to
numbers that go with each model.

Table 79 SNMP System Traps

OPTION
OBJECT LABEL
coldstart
coldStart
warmstart
warmStart
ES-2108 Series User's Guide
MODEL
ES-2108
ES-2108-F
ES-2108-LC
ES-2108-G
ES-2108PWR
OBJECT ID
1.3.6.1.6.3.1.1.5.1
1.3.6.1.6.3.1.1.5.2
Chapter 27 Access Control
Table 78 on page 205
for the
DESCRIPTION
This trap is sent when the Switch is
turned on.
This trap is sent when the Switch
restarts.
205

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es-2108pwrEs-2108 series

Table of Contents