Example: Dhcp Relay For Two Vlans; Figure 114 Dhcp Relay For Two Vlans; Figure 115 Dhcp Relay For Two Vlans Configuration Example - ZyXEL Communications ES-2108 User Manual

Chapter 25 DHCP
Table 72 IP Application > DHCP > VLAN (continued)
LABEL
DHCP Status
Delete
Cancel

25.4.1 Example: DHCP Relay for Two VLANs

The following example displays two VLANs (VIDs 1 and 2) for a campus network. Two
DHCP servers are installed to serve each VLAN. The system is set up to forward DHCP
requests from the dormitory rooms (VLAN 1) to the DHCP server with an IP address of
192.168.1.100. Requests from the academic buildings (VLAN 2) are sent to the other DHCP
server with an IP address of 172.23.10.100.

Figure 114 DHCP Relay for Two VLANs

For the example network, configure the VLAN Setting screen as shown.

Figure 115 DHCP Relay for Two VLANs Configuration Example

194
DESCRIPTION
For DHCP relay configuration, this field displays the first remote DHCP server IP
address.
Select the configuration entries you want to remove and click Delete to remove them.
Click Cancel to clear the Delete check boxes.
VLAN 1
VLAN 2
DHCP:192.168.1.100
DHCP:172.23.10.100
ES-2108 Series User's Guide