Change Your Password - ZyXEL Communications ES-2108 User Manual

Chapter 4 The Web Configurator
Table 6 Navigation Panel Links (continued)
LINK
Static Route
DiffServ
DHCP
Management
Maintenance
Access Control
Diagnostic
Syslog
Cluster
Management
MAC Table
ARP Table
Configure Clone

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator
password. Click Management > Access Control > Logins to display the next screen.
56
DESCRIPTION
This link takes you to screens where you can configure static routes. A static route
defines how the Switch should forward traffic by configuring the TCP/IP parameters
manually.
This link takes you to screens where you can enable DiffServ and set DSCP-to-
IEEE802.1p mappings.
This link takes you to a screen where you can configure the DHCP settings.
This link takes you to screens where you can perform firmware and configuration
file maintenance as well as reboot the system.
This link takes you to screens where you can change the system login password
and configure SNMP and remote management.
This link takes you to screens where you can view system logs and test port(s).
This link takes you to screens where you can setup system logs and a system log
server.
This link takes you to a screen where you can configure clustering management
and view its status.
This link takes you to a screen where you can view the MAC addresses (and types)
of devices attached to what ports and VLAN IDs.
This link takes you to a screen where you can view the MAC addresses – IP
address resolution table.
This link takes you to a screen where you can clone port attributes of a port and
transfer them to other port(s).
ES-2108 Series User's Guide