Mib Loader; User Loaded Mibs - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

Chapter 6 Tool
a packet is transmitted and routed through devices between the ENC and the device. To open this
screen, click Tool > PING/Trace Route.
Figure 111 Tool > PING/Trace Route
The following table describes the labels in this screen.
Table 64 Tool > PING/Trace Route
LABEL
Ping
TraceRoute
IP
Send Command Click this to begin the ping or traceroute connection test.
Clear output

6.7 MIB Loader

By default, the ENC stores some standard Management Information Bases (MIBs) and specific
ZyXEL devices' MIBs (listed in the Tool > MIB Loader > Default MIBs screen). The ENC allows
you to upload your private MIBs if you cannot find them in the Default MIBs screen through the
Tool > MIB Loader > User Loaded MIBs screen.

6.7.1 User Loaded MIBs

You may need to upload a device's private MIBs to the ENC if you want the ENC to support a specific
function for your device. Use this screen to upload a MIB file to the ENC.
158
DESCRIPTION
Select this and enter the IP address of a device (in the IP field) to which you want to test
the connection from the ENC.
Enter the IP address of the device to which you want to send a traceroute packet from the
the ENC.
Select this and enter the IP address of a device (in the IP field) to which you want to test
the connection from the ENC.
Enter a valid IP address.
Click this to clear the output content from your last test.
ENC User's Guide