ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 252

Chapter 9 Maintenance
Table 124 Backup/Restore
LABEL
Port
User Name
Password
FTP path
The following fields are available if you select Storage Server as the backup location.
Network Folder
Authentication
User Name
Password
Apply
Database Backup/Restore
BackUp
Restore
Remove
Name
Time
Version
Note
Schedule BackUp
Enable Schedule
BackUp
Schedule Type
Time
Apply
256
DESCRIPTION
Enter a new port if your FTP server does not use port 21 for the service.
Enter the user name for your FTP account.
Enter the password for your FTP account.
Specify in which folder you want to store the backup file.
Type the full path of a folder on a storage server, to which you want to back up
or restore the configuration.
Select this if your server prompts for identification before allowing access.
Enter the user name for server login if authentication is required.
Enter the corresponding password for server login.
Click this to save the changes in this section.
Click this to add a backup file (a ZIP file containing a SQL file and other files
such as device firmware and configuration files) to the list. The file can be
generated by performing backup immediately or by uploading a backup file.
Select a backup file in the list and click this to restore the file to the ENC after
you double confirm the action.
If you want to restore a file that does not exist on the ENC, you have to upload
the file to the ENC first. You can upload a file through the Maintenance >
Backup/Restore > Backup screen (by selecting Upload BackUp File) .
Select one or more backup files in the list and click this to remove the file from
the list.
This displays the name of an existing configuration file of the ENC. Click this
name to download the file to the computer where you are using to access the
ENC.
This field displays the date and time of backup of the configuration file.
This displays the software version of the ENC when the configuration file was
backed up.
This displays additional information about the backup file.
Select this to have the ENC automatically perform system backup periodically.
Select Daily to perform backup once per day or Weekly to perform backup
once per week.
Select at which hour you want to perform daily backup. Select on which week
day and at which hour you want to perform weekly backup.
Note: This is based on the time zone setting of the ENC server, not your
computer.
Click this to save the changes in this section.
ENC User's Guide