ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 148

Chapter 6 Tool
To open this screen, click a device in the Name field in the Tool > Inventory > Device screen,
then click the Interface tab.
Figure 101 Tool > Inventory > Device > Interface
The following table describes the labels in this screen.
Table 54 Tool > Inventory > Device > Interface
LABEL
Interface Info/Usage/Utilization Table on host ...
The line displays the Display Name of the device for which these corresponding information and statistics are
generated. These tables display basic port information and incoming/outgoing traffic statistics.
Refresh
Index
Description
Type
Mtu
148
DESCRIPTION
Click this in each table to update the table information respectively.
This field displays the index number of an entry in each table.
This field displays the name of a port or an interface on the device. swp means a switch
port.
This field displays the type of the port or interface. See ifType in RFC1213 for more
information.
This field displays the Maximum Transmission Unit (MTU) which is the maximum size (in
bytes) of a packet the port is allowed to receive and transmit.
ENC User's Guide