Event Configuration - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

Chapter 5 Event

5.2 Event Configuration

This screen shows a list of events that devices or the ENC may generate. By default, each event has
a priority (serverity level) and the corresponding action that the ENC should take when it receives
the event. You can use this screen to modify the severity and action.
To change the severity level and/or action of a default event, click Events > Configuration.
Figure 86 Events > Configuration > Default
The following table describes the labels in this screen.
Table 43 Events > Configuration > Default
LABEL
General
Stored Events
Days
Events Configuration
Activate
Deactivate
Edit
Status
Category
Event Name
Severity
Action
Apply
Reset
126
DESCRIPTION
Specify the number of days you wish to store event logs in ENC before removing
them.
Select one or more disabled events and click this button to enable them.
Select one or more enabled events and click this button to disable them.
Select an event and click this to modify the settings.
This field displays whether the event is currently enabled or disabled.
This field displays the category to which the event belongs.
This field displays the name of the event.
This field displays the severity level of the event.
This field displays the action the ENC takes when the event was generated.
Click this to save the changes.
Click this to discard the changes and reset the fields to their last saved settings.
ENC User's Guide