Ap Manager; The Ap Profile Screen - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

Chapter 8 Application
Table 110 Port Management > Authentication > 802.1x Authentication (continued)
LABEL
Reauthentication
Timer
Apply
Reset

8.12 AP Manager

This function is available for devices which supports wireless AP.

8.12.1 The AP Profile Screen

Use this screen to configure and look at wireless access point (AP) profiles which help configure
wireless settings for multiple wireless APs. To open this screen, click Application > AP Manager >
AP Profile.
Figure 180 AP Manger > AP Profile
The following table describes the labels in this screen.
Table 111 AP Manger > AP Profile
LABEL
Add
Edit
Remove
check box
Profile Name
SSID
Channel
234
DESCRIPTION
Specify the length of time required to pass before a client has to re-enter his or
her username and password to stay connected to the port.
Click Apply to save your changes.
Click Reset to discard your changes and reset the fields to their settings last time
saved.
DESCRIPTION
Click this to create an entry.
Select an entry in the table and click this to modify it.
Select an entry in the table and click this to delete it.
Select the check box of an entry and click Edit or Remove to take the action for
the entry respectively. Select or clear the check box at the table heading line to
select or clear all check boxes in this column.
This field displays the name of a wireless AP profile.
This field displays the SSID this wireless AP profile uses.
The SSID (Service Set IDentity) identifies the Service Set with which a wireless
station is associated. Wireless clients associating to the access point (AP) must
have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII
characters) for the wireless LAN.
When a wireless client scans for an AP to associate with, this is the name that is
broadcast and seen in the wireless client utility.
This field displays the operating frequency/channel this wireless AP profile uses.
ENC User's Guide