Inventory Device Details - Mac Table - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

Chapter 6 Tool
Table 57 Tool > Inventory > Device > Port Analyzer (continued)
LABEL
RemoteAddress
RemotePort
State
Address
Port
Back

6.2.7 Inventory Device Details - MAC Table

Use this screen to view all the MAC table enties on the selected device.
To open this screen, click a device in the Name field in the Tool > Inventory > Device screen,
then click the MAC Table tab.
Figure 105 Tool > Inventory > Device > MAC Table
The following table describes the labels in this screen.
Table 58 Tool > Inventory > Device > MAC Table
LABEL
MAC Table on host
Port
MAC Address
Status
152
DESCRIPTION
This field displays the IP address of a remote device which is trying to connect or has
connected to the device. 0.0.0.0 displays if no remote device is accessing the port on the
local device.
This field displays the number of a port on the remote device, which is used to
communicate with the local device for the service. 0 displays if no remote device is
accessing the port on the local device.
This field displays the connection status between the local and remote ports. listen
displays if the local port is listening to a connection request. established displays if the
connection has been successfully established.
This field displays the IP address of the device.
This field displays the number of a UDP port the device uses to send UDP packets.
Click this to exit this screen and go back to the previous screen (Tool > Inventory >
Device).
DESCRIPTION
This field displays the selected device's IP address.
Enter a port number here if you want to search any MAC address entries to which the
port is connected.
Enter a MAC address here if you want to search the specified MAC address entry.
Select a status from the drop-down list (All, other, invalid, learned, self, or mgmt) for a
search criteria.
ENC User's Guide