Shining 3D Einstar Vega Quick Start Manual page 12

Scan
Preparation
If the object to be scanned has rich geometric or textural
features, the scanning speed and quality can be better
guaranteed;
On the contrary, if the object to be scanned has fewer
geometric or textural features or a high degree of feature
repetition, you need to do some preparation work before
scanning to enhance your scanning experience.
For Portrait Scan
Specific requirements:
1. Hairstyle: Please keep it as neat as possible and avoid
hairstyles with loose strands or bangs.
2. Posture: Since the scanned object should remain as still
as possible during the scanning process, a comfortable
and easy-to-maintain posture is suggested before the
scan begins.
Wrong example
For Object Scan
Object
Transparent, shiny,
reflective or black objects
Objects with less
features or repetitive
features
Note:
Not recommend to scan following objects:
·Soft material object that cannot be hung.
·Lattice structures with many small deep holes.
·Moving or shaking objects. Frequent coordinate changes will lead to a poor scanning quality.
Preparation
Use washable or vanishing
scanning spray.
Choose one from below 3 methods
·Attach some rich geometric shapes
around or on the target object
·Place markers on the object and
enable Markers alignment in the
Advanced Settings.
·Add rich texture features and enable
Aquire texture and Texture alignment
Correct example
Notes while scanning
Scan as normal after
spraying.
Scan as normal after
preparations.