Page 1
PUMP-FORM-154 Ver:3 Appr/Eff Date:08/14/2024 - 08/14/2024 Approved By: TDAMICO PUMP-FORM-154 Ver:2 Appr/Eff Date:08/01/2024 - 08/01/2024 Approved By:DMACDUFF SKC AirChek Essential Operation The pump will come pre-calibrated, with tubing connected. 1. On the side of the pump, press the power button. The pump will light up, as shown below: 2.
Page 2
PUMP-FORM-154 Ver:3 Appr/Eff Date:08/14/2024 - 08/14/2024 Approved By: TDAMICO PUMP-FORM-154 Ver:2 Appr/Eff Date:08/01/2024 - 08/01/2024 Approved By:DMACDUFF To charge the pump, simply plug in the dock and place the pump inside. You will see a small light on the front. You can plug up to five docking stations together, to create a five-station charger.
Page 3
PUMP-FORM-154 Ver:3 Appr/Eff Date:08/14/2024 - 08/14/2024 Approved By: TDAMICO PUMP-FORM-154 Ver:2 Appr/Eff Date:08/01/2024 - 08/01/2024 Approved By:DMACDUFF Calibration Before calibration, the pump must run for 10 minutes MINIMUM. Previous run must be cleared to calibrate. To clear previous run hold PUMP button until screen shows four dashes ( - - - - ) 1.
Need help?
Do you have a question about the AirChek Essential and is the answer not in the manual?
Questions and answers