Tech Source RAPTOR 1100T - DRIVERS FOR LINUX INSTALLATION-REFERENCE Installation And Reference Manual page 40

Raptor Drivers for Linux Installation and Reference Manual
To run X server in 8+24-bit mode with the 24-bit TrueColor
visual as default, set the DefaultDepth option in the Screen
section to 24 as shown.
Section "Device"
Identifier
Driver
Card
BusID
Option
Option
Option
EndSection
Section "Screen"
Identifier
Device
Monitor
DefaultDepth
SubSection
Depth
Modes
EndSubSection
SubSection
Depth
Modes
EndSubSection
SubSection
Depth
Modes
EndSubSection
End Section
To select 8+8-bit mode, the option "Mode" option should be set
to "8+8".
The following example shows the mox16 mode being selected
for a Raptor 1100T card. The "Mode" option is set to "mox16".
Section "Device"
Identifier
Driver
Card
BusID
Option
Option
Option
EndSection
"Raptor1.1KT"
"rapt"
"TSI Raptor 1100T"
"PCI:0:12:0"
"Device" "/dev/rap1kt0"
"Mode" "8+24"
"ScaleCursPos" "on"
"Raptor1100T"
"Raptor1.1KT"
"CustomMonitor"
24
"Display"
8
"1280x1024"
"Display"
16
"1280x1024"
"Display"
24
"1280x1024"
"Raptor1.1KT"
"rapt"
"TSI Raptor 1100T"
"PCI:0:12:0"
"Device" "/dev/rap1kt0"
"Mode" "mox16"
"ScaleCursPos" "on"
5-8