Monitor Section; Device Section - Tech Source RAPTOR 1100T - DRIVERS FOR LINUX INSTALLATION-REFERENCE Installation And Reference Manual

Raptor Drivers for Linux Installation and Reference Manual
Section "Device"
Identifier
Driver
Card
BusID
Option
Option
Option
# Option
EndSection
Section "Screen"
Identifier "Raptor2100T"
Device
Monitor
DefaultDepth
SubSection "Display"
Depth
Modes
EndSubSection
SubSection "Display"
Depth
Modes
EndSubSection
SubSection "Display"
Depth
Modes
EndSubSection
EndSection
# TSI Raptor 2100T XFree86 Configuration Sections

4.6.1 Monitor Section

This section contains configuration information for the
Sony DDM monitor and should remain unchanged.

4.6.2 Device Section

Identifier: Each instance of Raptor card should have a
unique identifier. This identifer is used in the
Screen section.
NOTE: The BusID value in the configuration file must be
changed manually. Please see the description below for details.
"Raptor2.1KT"
"rapt"
"TSI Raptor 2100T"
"PCI:0:12:0"
"Device" "/dev/rap2kt0"
"ScaleCursPos" "on"
"Mode" "8"
"TranspColor" "0x0a3246"
"Raptor2.1KT"
"Sony DDM Rap2kt"
8
8
"2048x2048"
16
"2048x2048"
24
"2048x2048"
4-6