Selecting Bit-Depths; Setting Bit-Depth On I-Class Cards - Tech Source RAPTOR 1100T - DRIVERS FOR LINUX INSTALLATION-REFERENCE Installation And Reference Manual

Raptor Drivers for Linux Installation and Reference Manual
Section "Screen"
Identifier "Raptor1100T-1"
Device "Raptor1.1KT-1"
Monitor "CustomMonitor"
DefaultDepth
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
# TSI Raptor 1100T XFree86 Configuration Sections
5.6

Selecting Bit-Depths

5.6.1 Setting Bit-Depth on I-Class Cards

I-Class cards support 8-bit, mox16 and mox24 modes.
default windows comes up in 8-bit mode on these cards. For an
explanation of the various MOX modes, please see Section
5.6.3.
The following example shows the Device Section of the Raptor
2500 with mox24 mode enabled:
Section "Device"
Identifier "Rapqfp0"
Driver "tsi"
BusID "PCI:0:10:0"
ChipSet "i128v2"
Card "TSI Raptor 2500"
Option "Device"
Option "mox24"
End Section
Similarly, changing the "mox24" to "mox16" will enable the
mox16 mode. To select 8-bit mode, just comment out that line.
8
"/dev/rapqfp0"
5-6
By