Tech Source RAPTOR 1100T - DRIVERS FOR LINUX INSTALLATION-REFERENCE Installation And Reference Manual page 19

Chapter 3 – Software Installation for I-Class Cards
/etc/X11/XF86Config.raptor
/etc/X11/XF86Config.rapqfp
NOTE: From this point on, the name XF86Config will be
used to refer to the config file used by the XFree86 server.
The sections for Raptor 2000 are listed below. Similar sections
are added for the Raptor 2500. The required modifications are
explained in the following subsections
# TSI Raptor 2000 XFree86 Configuration Sections
Section "Monitor"
Identifier "Sony DDM Rap2k"
VendorName "Sony"
ModelName
HorizSync 31.5 - 150.0
VertRefresh 50-90
ModeLine "2048x2048" 357.18 2048 2088 2408
2816 2048 2051 2054 2114
DisplaySize 498 498
EndSection
Section "Device"
Identifier
Driver
BusID
ChipSet
Card
Option
# Option
EndSection
Section "Screen"
Identifier "Raptor2000"
Device
Monitor
DefaultDepth
SubSection "Display"
Depth
Modes
EndSubSection
EndSection
# TSI Raptor 2000 XFree86 Configuration Sections
or
.
"DDM-2800"
"Raptor0"
"tsi"
"PCI:0:10:0"
"i128v2"
"TSI Raptor 2000"
"Device" "/dev/raptor0"
"MOX24"
"Raptor0"
"Sony DDM Rap2k"
8
8
"2048x2048"
3-5