Sanyo VCC-HD2500 Manual page 64

4
Select the radio button to specify whether to set detection lines or areas and configure
the detection conditions. When finished, click
Although you need to specify whether to set detection lines or areas, you can view the set detection lines and
areas together.
Setting detection lines
1
Select the radio button next to [LINE] and drag the mouse to draw detection lines.
You can draw up to eight detection lines.
Each detection line has a serial number (1 to 8) and area designations (A and B).
2 Setting detection areas
Select the radio button next to [AREA] and drag the mouse to draw detection areas.
You can draw up to four detection areas.
Each detection area has a serial number (1 to 4) and area designations (A and B).
Configuring detection conditions
3
Select the [LINE]/[AREA] radio button, select a line/area number, and specify the detection conditions for it. In this
way, configure detection conditions for all the detection lines and detection areas.
To delete a detection line/area, select the [LINE]/[AREA] radio button, select a line/area number, and
click DELETE
<Example: Configuring detection conditions for LINE 1>
Select the [LINE] radio button and, in the pull-down menu, select the line number "1".
1
In [SIZE], select the size of the object you want to detect.
2
Specify the size of the object you want to detect.
.
and then
SET
Working with Administrator Configuration Screens 44/66
.
BACK